GO YEN CA-25MM RCA-25MM 1" MM series Pulse jet valve

Model No: CA-25MM RCA-25MM
Place of Origin: Zhejiang,China (Mainland)
Power: Pneumatic
Standard or Nonstandard: Standard
Pressure: Low Pressure
Structure: Diaphragm
Material: Casting
Temperature of Media: Normal Temperature
Media: Gas
Brand Name: Others

inquire

skypebasketAdd to Basket  Edit

Share |

Product Description

Payment & Shipping Terms Supply Capacity
Unit Price: 10.0~22.0 USDProduction Capacity:1000 units per week
Payment Term:Western Union, T/T, PaypalPacking:Plastic...
MOQ:10 UnitsDelivery Date:within 15 working days...
Means of Transport:Land, Ocean, Air

Product Name : GOYEN CA-25MM RCA-25MM 1" MM series Pulse jet valve
CA-25MM RCA-25MM Goyen 1MM series Pulse jet valve
Description
Very high performance diaphragm valve designed to be mounted directly into the compressed air manifold. 1" and 1.5" models are supplied with outlet pipes to length specified, 3" and 3.5"models are supplied without outlet pipes.
Suitable for
Dust collector applications, in particular for reverse pulse jet filter cleaning including bag filters, cartridge filters, envelope filters, ceramic filters, and sintered metal fibre filters.
Construction
Body and Dresser Nuts: Diecast Aluminium
Ferrule: 304 SS
Armature: 430FR SS
Diaphragm and Seals: Nitrile or Viton (reinforced)
Spring: 304 SS
Screws: 302 SS
Outlet Pipe: Schedule 40 wrought steel zinc passivated
Diaphragm Seat: PA-6 (25 & 40MM standard), Nitrile coated mild steel (76MM standard), or Viton coated mild steel (all sizes)
Refer to Q Series Solenoid product data sheet for solenoid construction details.
Operation
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Maintenance
Before conducting any maintenance activity on the system ensure that components are fully isolated from pressure and power supplies. Pressure and power should not be reapplied until the valve has been fully assembled. Diaphragm and pilot inspection should be conducted annually.
Installation
1. MM valves are installed through the tank, refer to the appropriate template listed above.
2. To avoid any potential operational problems it is preferable that the valves are
not mounted underneath the tank where condensation may collect. All o-rings
should be coated with a silicone based lubricant or similar.
3. Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes. Tanks and blowtubes must be independently restrained.
4. Tighten dresser nuts to 20Nm (15 ftlbs) max.
5. Tighten pipe outlets to 20 Nm (15 ftlbs).
6. Connect to pilot valve, if remotely actuated.
7. Ensure compressed air supply is dry and free from oil and dirt.
8. Check all cleaning system components are secure before applying pressure.
9. Apply moderate pressure and check for leaks.
10.Fully pressurise system.
11 .Test fire and listen for proper actuation and crisp pulse noises.
Approvals
Integrally piloted valves meet the requirements of:
. Atex II 2D Mechanical
. CSA (C&US)
C22.2 No. 139-1982 UL Std No. 429
. C-Tick - integral pilots
. EMC (89/336/CE) - integral pilots

Voltage: DC12V,DC24V,AC36V,AC110V,AC220V,AC380V
Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C(179.6°F) Viton Seals: -29°C (-20.2°F) to 232°C (449.6°F)
Nominal Size,Weights, Product Characteristics and Performance:
ModelNom.Port SizeWeightDiaphragm KitsFlow
SizemminchIntegral Pilot (CA)Kg(lbs)Remote Pilot (RCA)Kg(lbs)NitrileVitonKVCV
CA/RCA25MM252510.72(1.59)0.50(1.10)K2501K25032630
CA/RCA40MM40401.51.12(2.47)0.90(1.98)K4000K40074451
CA/RCA76MM767633.90(8.60)3.68(8.11)K7600K7601200233
CA/RCA102MM1021023.53.90(8.60)3.68(8.11)K10200K10201238277
Dimension(mm and inch):
CA-25MM RCA-25MM Goyen 1MM series Pulse jet valve

Category: GO YEN Pulse Valve

Related Category: Pulse Valve Repair Kits  Turbo Mecair Pulse Valve  ASCO Pulse Valve  Pulse Signal Controllers 

«
QR Code
Contact Us
Welcome to our website !